|
Do it yourself
| |||
| ||||
Model: Piaggio Fly
Today's steps will show you how to remove the front plastic cover and the horn from the Piaggio Fly scooter. First, place the scooter on its centre stand and start unscrewing the fixing screws of the central cover of the shield using a T30 torx key. Once removed, you will have access to the horn, as shown in the video. Next, remove the horn by unscrewing the screws and disconnecting the electrical connector. Replace it with the new one and finally reassemble the central plastic cover of the front shield!
Updated on 7 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Fly
In order to replace the horn of the Piaggio Fly, you need to loosen the screws that secure the panel located inside the front part of the motorcycle:…
Fly
Below are the steps necessary to remove and replace the battery of the Piaggio Fly scooter. First, put down the centre stand and lift the seat; you w…
Fly
Follow this brief and simple guide to remove and replace the rear wheel of the Piaggio Fly, both the 50 and 125 versions. First, place the central st…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |