Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa 125 Primavera?

Model: Piaggio Vespa 125 Primavera
Part: Engine oil

Video tutorial

This tutorial demonstrates how to change the engine oil on a Piaggio Vespa 125 Primavera scooter, a very simple and quick task to perform every 12 months. First, ensure the engine is cool enough, then place a container under the scooter, locate the drain plug, and unscrew it using a 23mm spanner.

Allow all the oil in the system to drain out, remove the secondary filter, and clean it of any dirt. Next, unscrew the main filter, tighten the replacement, reassemble everything, and pour in the new oil through the upper hole.


Updated on 16 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Piaggio Vespa 125 Primavera?
How to Change the Engine Oil on a Piaggio Vespa 125 Primavera?
Vespa 125 Primavera Changing the engine oil on a Piaggio Vespa 125 Primavera scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait …
How to Set the Time on a Piaggio Vespa 125 Primavera
How to Set the Time on a Piaggio Vespa 125 Primavera
Vespa 125 Primavera This guide will show you how to set the time on the Piaggio Vespa 125 Primavera scooter. First, place the scooter on its stand and turn on the instru…
Where are the Fuses on the Piaggio Vespa 125 Primavera Scooter?
Where are the Fuses on the Piaggio Vespa 125 Primavera Scooter?
Vespa 125 Primavera In this video, you can see where the fuse box is located on the Piaggio Vespa 125 Primavera scooter, useful in case you need to check the fuse of a m…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos