Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa GTS 300 Scooter?

Model: Piaggio Vespa Gts 300
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil on a Piaggio Vespa GTS 300 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough.

Then, position a container underneath, locate the drain plug, and loosen it using a 24 mm hex key. Allow all the oil in the system to drain out. Remove the secondary filter and clean it of any dirt residue. Next, unscrew the main filter, tighten the replacement, reassemble everything, and pour in the new oil through the top hole.


Updated on 18 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Piaggio Vespa GTS 300 Scooter
How to Change the Engine Oil on the Piaggio Vespa GTS 300 Scooter
Vespa Gts 300 As shown in this tutorial, changing the engine oil on the Piaggio Vespa 300 GTS scooter is a straightforward and quick task. First, ensure the engine…
How to Change the Engine Oil in a Piaggio Vespa GTS 300 Scooter
How to Change the Engine Oil in a Piaggio Vespa GTS 300 Scooter
Vespa Gts 300 Changing the engine oil in a Piaggio Vespa GTS 300 scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait for th…
How to Change the Engine Oil in a Piaggio Vespa GTS 300 Scooter?
How to Change the Engine Oil in a Piaggio Vespa GTS 300 Scooter?
Vespa Gts 300 In this tutorial, see how to change the engine oil in a Piaggio Vespa GTS 300 scooter, a very simple and quick operation. First, ensure that the engi…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos