Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the motor oil in the Piaggio Vespa GTS 300 scooter, a very simple and quick operation, to be carried out every 12 months. First of all, we wait for the engine to be cold enough, then we locate the drain hole cap and unscrew it using a socket wrench. We then remove the secondary filter, clean it from any dirt residue, and let all the oil contained in the system drain out. At this point, we can unscrew the main filter, tighten the replacement, reassemble everything, and pour the necessary amount of oil through the appropriate hole.

Posted on 27 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on Piaggio Vespa GTS 300
How to Change the Engine Oil on Piaggio Vespa GTS 300
Vespa Gts 300 To change the engine oil on the Piaggio Vespa GTS 300, loosen the drain plug of the oil tank, located at the bottom in front of the exhaust. Once the…
How to Change the Engine Oil on a Piaggio Vespa GTS 300?
How to Change the Engine Oil on a Piaggio Vespa GTS 300?
Vespa Gts 300 In this tutorial, learn how to change the engine oil on a Piaggio Vespa GTS 300, a very simple operation to perform annually. First, ensure the engin…
How to Change the Engine Oil in a Piaggio Vespa GTS 300 Scooter?
How to Change the Engine Oil in a Piaggio Vespa GTS 300 Scooter?
Vespa Gts 300 In this tutorial, see how to change the engine oil in a Piaggio Vespa GTS 300 scooter, a very simple and quick operation. First, ensure that the engi…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos