Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see the instructions that will allow us to disassemble and replace the front shock absorber of the Piaggio Vespa 50 Special. First of all, we put the central stand and start disassembling and removing the front wheel, unscrewing the five nuts; then we remove the metal cover of the fork and unscrew the two suspension nuts, as shown in the video. At this point, we unscrew the screw of the mudguard and then the nut located on the top of the shock absorber, in order to remove it; we then replace it with the new one, following the video tutorial until the end!

Posted on 27 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the wheel and tyre from the Piaggio Vespa 50 Special
How to remove the wheel and tyre from the Piaggio Vespa 50 Special
Vespa 50 Special Today's video will show you how to remove and replace the wheel or tyre of the Piaggio Vespa 50 Special, as well as the Vespa PK 50 and PX 125. First…
How to Replace the Tyre on the Piaggio Vespa 50 Special
How to Replace the Tyre on the Piaggio Vespa 50 Special
Vespa 50 Special In this video, you will see how to remove the front wheel for tyre and inner tube replacement on the Piaggio Vespa 50 Special, as well as the R, L, a…
How to Adjust the Carburetion on a Piaggio Vespa 50 Special
How to Adjust the Carburetion on a Piaggio Vespa 50 Special
Vespa 50 Special This guide shows how to perform the maximum carburetion adjustment on the engine of the Piaggio Vespa 50 Special, as well as the Vespa 125 Primavera.…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos