Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Piaggio Vespa 125 Sprint Scooter?

Model: Piaggio Vespa 125 Sprint
Part: Service warning light

Video tutorial

In this tutorial, you will learn how to reset the service on a Piaggio Vespa 125 Sprint scooter, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. Start by inserting the key and turning on the ignition, then scroll through the display screens until you reach the battery voltage.

Next, press the "MODE" button to the right, hold it down, and release it only when the service light disappears from the dashboard. Finally, restart the ignition to complete the procedure.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

Where Is the Battery Located in the Piaggio Vespa 125 Sprint Scooter?
Where Is the Battery Located in the Piaggio Vespa 125 Sprint Scooter?
Vespa 125 Sprint In this video, you can see where the battery is located in the Piaggio Vespa 125 Sprint scooter and how to proceed if you need to replace it, a very …
How to Set the Clock on Piaggio Vespa 125 Sprint
How to Set the Clock on Piaggio Vespa 125 Sprint
Vespa 125 Sprint In this guide, you will find the main instructions to set the time on the display of the instrument panel of the Piaggio Vespa 125 Sprint scooter. Fi…
How do you replace the exhaust pipe of the Piaggio Vespa 125 Sprint?
How do you replace the exhaust pipe of the Piaggio Vespa 125 Sprint?
Vespa 125 Sprint To replace the exhaust pipe of the Piaggio Vespa 125 Sprint, you need to loosen the screws of the supports that fix the exhaust terminal to its housi…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos