Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3
Part: Headlight

Today's procedure will show us how to disassemble and replace the front headlight of the Piaggio MP3 scooter, in simple steps. First, we put the scooter on the center stand and start removing the front plastic cover, levering on the sides; then we unscrew the fixing screws found underneath, disconnecting the electrical connector of the bulbs to remove it, as shown in the video. At this point, if necessary, we replace the bulbs of the front headlight, replacing either the entire headlight; we reassemble and connect the optical group, applying the reverse procedure!

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulbs on the Piaggio MP3
Replacing the Front Headlamp Bulbs on the Piaggio MP3
Mp3 In this brief and simple guide, learn how to replace the front headlamp bulbs on the Piaggio MP3 scooter. First, place your scooter on the centre sta…
How to Replace the Headlight Bulb on a Piaggio MP3
How to Replace the Headlight Bulb on a Piaggio MP3
Mp3 To replace the headlight bulb on the Piaggio MP3, loosen the screws securing the windscreen and the fairing directly above the headlight. Once these …
How to Replace the Rear Light Bulb on the Piaggio MP3
How to Replace the Rear Light Bulb on the Piaggio MP3
Mp3 In this short and simple guide, see how to remove and replace the rear light bulb of the Piaggio MP3 scooter, following the instructions below. First…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos