Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on a RAM 1500.

Model: RAM 1500 DS, MK 4, DJ - Years 2009-2019
Part: Air filter

This video will show us how to replace the air filter of a RAM 1500. To start we open the hood; on the left we will find the filter compartment. We loosen the clamp, as shown at 0: 40, to allow the tube to be pulled out. Now detach the 4 hooks around the plastic support, extract the second smaller tube simply by pulling it out and we can remove the lid. Let's take out the old filter and replace it with the new one. We reinsert the cap, close the 4 hooks, insert the smaller tube. Now put the larger tube back in place, tightening the clamp with a screwdriver and the replacement will be carried out.

Posted on 24 December 2021 by ScegliAuto

Video tutorial

Related tutorials

How to replace the Ram 1500 air filter
How to replace the Ram 1500 air filter
RAM 1500 (2019-2026 / MK 5, DT) If your Ram 1500's air filter is showing severe wear then it is time to replace it with a new model. Let's find out what the necessary steps are. Onc…
How to replace the cabin air filter of the RAM 1500
How to replace the cabin air filter of the RAM 1500
RAM 1500 (2009-2019 / DS, MK 4, DJ) In this new guide of ours, we will discover how to replace the cabin air filter of your RAM 1500. First of all, you need to reach the front passenger…
How to replace the cabin air filter of the RAM 1500.
How to replace the cabin air filter of the RAM 1500.
RAM 1500 (2019-2026 / MK 5, DT) Let's briefly see how to replace the cabin air filter of the RAM 1500, following these simple and quick steps. First, we get on board the vehicle, on…

How to Replace the Rear Headlight Bulbs on a Peugeot 308

Are the rear lights on your Peugeot 308 SW not working? This video shows how to replace the damaged bulbs. Open the boot lid, and using a screwdriver, unscrew (with a socket wrench or screwdriver with a bit) the securing nuts located at the side of the rear headlight. Once the headlight is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace the damaged bulbs with identical ones in size and voltage. Finally, refit the headlight and reverse the assembly of the other parts.

Watch the video!


by ScegliAuto

More videos