Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter in the RAM 1500?

Model: RAM 1500 MK 5, DT - Years 2019-2026
Part: Air filter

In this tutorial we can see how to replace the air filter in the RAM 1500 pick-up, a very simple and fast operation. First of all, let's get a suitable replacement, the model of which is shown in the video itself, then open the bonnet and go to the passenger side. Subsequently, we open the filter box by unscrewing the bolts placed along the perimeter, extract the old filter and clean the interior thoroughly from various dirt and any leaves. Finally, we assemble the spare part following the reverse procedure, and making sure to position it in the right direction.

Posted on 11 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the Dodge Ram 1500?
How to replace the air filter on the Dodge Ram 1500?
RAM 1500 (2009-2019 / DS, MK 4, DJ) In order to replace the air filter on the Dodge Ram 1500, the hood must be opened to access the engine compartment. The air filter box will be locate…
How to replace the Ram 1500 air filter
How to replace the Ram 1500 air filter
RAM 1500 (2019-2026 / MK 5, DT) If your Ram 1500's air filter is showing severe wear then it is time to replace it with a new model. Let's find out what the necessary steps are. Onc…
How to replace the air filter in the RAM 1500 pick-up?
How to replace the air filter in the RAM 1500 pick-up?
RAM 1500 (2009-2019 / DS, MK 4, DJ) Replacing the air filter in the RAM 1500 pick-up is a very simple operation, let's see how to proceed in this tutorial. After having obtained the rig…

How to Replace the Front Bumper on a BMW 3 Series

This simple operation will be illustrated in this short video guide. As the first step, raise the hood to access and remove the bolts securing the top of the bumper. Next, remove the bolts and clips that attach the inner fender to the rear of the bumper. This operation will need to be repeated on both sides. Also, remove the screws that secure the bottom of the bumper to the lower engine cover. Now, just pull the bumper away, being careful to disconnect the connectors at the back.

Watch the video!


by ScegliAuto

More videos