Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do I remove the internal partition of the RAM Promaster?

Model: RAM Promaster MK 1 - Years 2014-2022
Part: Checks and maintenance

In order to remove the internal partition panel of the RAM Promaster it is necessary to open the sliding side door of the vehicle, so that its rear compartment can be accessed: from here it will be possible to loosen all the screws that fix the panel, which are positioned along the side top and along the bottom side. When all the screws have been loosened it will be possible to completely remove the old panel; this can be replaced with a new one or it will also be possible not to install the spare part, allowing the passenger compartment and the rear compartment to be communicating.

Posted on 20 October 2022 by ScegliAuto

Video tutorial

Related tutorials

How do I replace the RAM Promaster air filter?
How do I replace the RAM Promaster air filter?
RAM Promaster (2014-2022 / MK 1) In order to replace the RAM Promaster air filter, you need to open the hood in order to have access to the components inside the engine compartment. …
Where are the fuses located in the RAM Promaster?
Where are the fuses located in the RAM Promaster?
RAM Promaster (2014-2022 / MK 1) Inside the RAM Promaster, the fuses can be found in the appropriate fuse boxes that are installed in the vehicle: in this type of vehicle, two boxes …
How to Adjust the Sliding Door on the RAM ProMaster?
How to Adjust the Sliding Door on the RAM ProMaster?
RAM Promaster (2014-2022 / MK 1) To adjust the sliding door on the RAM ProMaster, open the door to access the screws located at the hinges. Once you locate these screws, tighten or l…

How to Top Up the Radiator Fluid on Mercedes Vito

Learn how to top up the fluid in the cooling radiator reservoir on a Mercedes Vito yourself to save on labour costs. First, pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and secure it with the metal prop. Locate the cap for topping up the fluid in the radiator reservoir (unscrew it). Using a funnel, top up with screen wash fluid and close the reservoir cap. Close the engine cover after maintenance. Test the correct functioning of the maintenance performed previously.

Watch the video!


by ScegliAuto

More videos