Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the new RAM 3500

Model: RAM 3500 DT, MK 5 - Years 2019-2026
Part: Fuse box

In this new mini guide of ours dedicated to your brand new RAM 3500 from 2023, we're going to find out where the box containing all the various vehicle fuses is located. In this way you will finally be able to intervene in an autonomous and targeted manner in the event of any electrical faults. First, make sure you've parked your RAM 3500 safely and powered it down completely. Immediately afterwards, go outside and lift the front hood. Position the safety arm and at this point locate the fuse box you were looking for on the lower right hand side.

Posted on 18 March 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box on the Ram 3500
Where is the fuse box on the Ram 3500
RAM 3500 (2009-2019 / MK 4, DS, DJ) The fuse box on the Ram 3500, unlike many other vehicles, is not located inside the dashboard but in the engine compartment. To be able to reach it, …
Where is the fuse box of the Dodge RAM 3500
Where is the fuse box of the Dodge RAM 3500
RAM 3500 (2009-2019 / MK 4, DS, DJ) Unlike other cars belonging to the same category as the Dodge RAM 3500, the fuse box is not located inside the dashboard or glove compartment but dir…
Where is the 2021 RAM 3500 fuse box located
Where is the 2021 RAM 3500 fuse box located
RAM 3500 (2019-2026 / DT, MK 5) Knowing the exact position of the fuse box of your RAM 3500 is very important if you want to solve any problems that affect the electrical components…

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Watch the video!


by ScegliAuto

More videos