Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install a protective film on the headlights of a Dodge Ram vehicle?

Model: RAM 2500 D2, MK 4, DS, DJ - Years 2009-2019
Part: Accessory kit

The installation of a protective film allows us to protect the headlights from scratches caused by small impacts and preserve them against the action of sunlight, which tends to make them yellow. After purchasing it from a car parts and accessories dealer, let's see how to apply this protective film. First, we need to thoroughly clean the headlight and then, while it is still wet, apply the film, being careful to respect the edges. We use a soft cloth to make it adhere well and we pass the hairdryer several times to ensure it dries completely.

Posted on 2 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear light bulb on the Dodge Ram 2500?
How to replace the rear light bulb on the Dodge Ram 2500?
RAM 2500 (2009-2019 / D2, MK 4, DS, DJ) In order to replace the rear light bulb of the Dodge Ram 2500 you need to lower the door of the rear compartment of the car, so that you can access t…
How to replace the fuel pump of the Dodge RAM 2500.
How to replace the fuel pump of the Dodge RAM 2500.
RAM 2500 (2002-2009 / DM, DH, D1, DC, MK 3, DR) Today's procedure will illustrate how to disassemble and replace the fuel pump of the Dodge RAM 2500, following the instructions below. First, we lif…
Replace the front turn signal bulbs on the Dodge Ram 2500
Replace the front turn signal bulbs on the Dodge Ram 2500
RAM 2500 (2019-2026 / DT, MK 5) In this video we will see how to remove and replace the front side turn signal bulbs of the Dodge Ram from 2019 onwards, in simple steps. First we ar…

How to Replace the Timing Belt on a Chevrolet Matiz

How to replace the timing belt on a Chevrolet Matiz. Open the bonnet and secure it, lift the car on a column lift (if necessary, remove the front wheel using a screwdriver to take off the right wheel arch liner). Use a fixed spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket spanner to undo the securing bolt of the tensioner pulley, then remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket spanner. Finally, refit the rivets along with the wheel arch liner and reattach the wheel with the tyre to the vehicle.

Watch the video!


by ScegliAuto

More videos