Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. RAM
    3. :
  3. 2500
    4. : How to replace the rear light bulb on the Dodge Ram 2500?

RAM 2500 - Video tutorial

Model: RAM 2500 MK 4, D2, DJ, DS - Years 2009-2019
Part: Light bulb
Operation: How to replace the rear light bulb on the Dodge Ram 2500?

In order to replace the rear light bulb of the Dodge Ram 2500 you need to lower the door of the rear compartment of the car, so that you can access the screws that fix the headlight laterally. The latter can then be extracted from its housing and the bulb inside it will be extracted and disconnected from the connector. The new bulb must then be connected to this, which must subsequently be inserted inside the lighthouse. Once the bulb has been inserted, it will be possible to fix the headlight to its housing with the lateral screws.


Posted on 5 August 2022 by ScegliAuto



How to replace the headlight bulb on the Dodge Ram 2500?
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) In order to replace the headlight bulb of the Dodge Ram 2500 you need to remove the grille located in the central part of the car, immediately above
Replace the front turn signal bulbs on the Dodge Ram 2500
RAM 2500 (2019-2024 / DT, MK 5) In this video we will see how to remove and replace the front side turn signal bulbs of the Dodge Ram from 2019 onwards, in simple steps. First we ar
Modify the rear seat of the Dodge Ram 2500
RAM 2500 (2009-2019 / MK 4, D2, DJ, DS) How to modify the rear seat of the Dodge Ram 2500: the first thing to do is to remove the metal plates that are positioned on the sides of the body.

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos