Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs in a RAM 2500 Pickup?

Model: RAM 2500 MK 4, D2, DS, DJ - Years 2009-2019
Part: Headlight bulb

In this tutorial, you will see how to replace the headlight bulbs in a RAM 2500 pickup, a very simple operation. First, open the hood and remove the upper protective panel. Then, unscrew the 4 bolts securing the grille and take it off. Once done, remove the headlight bolts using the same wrench, pull it out from the body, and open the large cap at the back. At this point, you can remove the old bulb by turning it counterclockwise, insert the replacement, and reassemble everything by following the reverse procedure.

Updated on 12 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulbs in a RAM 2500?
How to Replace the Headlight Bulbs in a RAM 2500?
RAM 2500 (2002-2009 / DM, DC, D1, DH, MK 3, DR) .. In this tutorial, you will see how to replace the headlight bulbs in a RAM 2500 pickup, a very simple and quick operation. First, ensure.. …
How to Replace the Third Brake Light Bulbs on a RAM 2500 Pickup?
How to Replace the Third Brake Light Bulbs on a RAM 2500 Pickup?
RAM 2500 (2002-2009 / DM, DC, D1, DH, MK 3, DR) In this tutorial, you will see how to replace the third brake light bulbs on a RAM 2500 pickup, a very simple and quick operation. To do this, you wi…
How to Remove the Rear Headlight on a RAM 2500?
How to Remove the Rear Headlight on a RAM 2500?
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) In this tutorial, you will see how to remove the rear headlight on a RAM 2500 pickup, a very simple and quick operation to perform when replacing a b…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos