Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb on a RAM 1500

Model: RAM 1500 DT, MK 5 - Years 2019-2026
Part: Headlight bulb

Today, you will learn how to replace the headlight bulb on a RAM 1500. To perform the bulb replacement, open the hood and turn the front wheel inward. Remove the fender and using a socket wrench with an extension, loosen the inner headlight nut. Disconnect the headlight connector by reaching in from the bottom of the vehicle. Slightly move the front grille to extract the headlight. Remove the lens and replace the bulb. Insert the new bulbs, close the lens, and position the headlight in its housing. Reinstall the grille and connect the headlight connector. Tighten the nut and close the hood.

Posted on 30 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb on a Dodge Ram 1500
How to Replace the Headlight Bulb on a Dodge Ram 1500
RAM 1500 (2009-2019 / DS, MK 4, DJ) To replace the headlight bulb on a Dodge Ram 1500, first remove the front grille by opening the hood and loosening all the screws at the top. Once th…
How to Replace the Rear Headlight Bulb on a Dodge Ram 1500?
How to Replace the Rear Headlight Bulb on a Dodge Ram 1500?
RAM 1500 (2009-2019 / DS, MK 4, DJ) To replace the rear headlight bulb on a Dodge Ram 1500, lower the tailgate to access the screws located between the headlight and the bracket. Once t…
How to replace the headlight bulb of the 2015 RAM 1500.
How to replace the headlight bulb of the 2015 RAM 1500.
RAM 1500 (2009-2019 / DS, MK 4, DJ) To replace the headlight bulb on a 2015 RAM 1500 vehicle, we need to remove the headlight assembly. Open the front hood and unscrew the nuts that sec…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos