Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Front Turn Signal Bulbs on the Dodge Ram 2500

Model: RAM 2500 DT, MK 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Side marker bulb

See other generations:
Video tutorial

In this video, you will learn how to disassemble and replace the front turn signal bulbs on the Dodge Ram from 2019 onward, in simple steps. First, remove the plastic cover of the bulb located on the front wheel well by taking off the plastic clip; then disconnect the socket, which comes with the bulb, removing it and replacing it with the new one, as shown in the video.

At this point, insert it correctly and check its operation; proceed to replace the other turn signal bulb in the same manner!


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on a Dodge RAM 2500 MK4
Replacing the Front Brake Pads on a Dodge RAM 2500 MK4
RAM 2500 (2009-2019 / MK 4, DJ, DS, D2) This brief guide shows how to remove and replace the front brake pads on a fourth-generation Dodge RAM 2500 in simple and quick steps. First, lift th…
How to Replace Brake Pads on the Dodge RAM 2500
How to Replace Brake Pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, DJ, DS, D2) This guide shows the procedure for removing and replacing the front and rear brake pads on the Dodge RAM 2500. First, lift the vehicle and start by r…
How to Remove the Windshield Wiper Motor of the Dodge RAM 2500
How to Remove the Windshield Wiper Motor of the Dodge RAM 2500
RAM 2500 (1994-2001 / BE, BR, MK 2) In this video tutorial, you will learn how to remove and replace the windshield wiper motor of the Dodge RAM 2500 by following these simple steps. Fi…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos