Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windshield Wiper Motor of the Dodge RAM 2500

Model: RAM 2500 BE, BR, MK 2 - Years 1994-2001

In this video tutorial, you will learn how to remove and replace the windshield wiper motor of the Dodge RAM 2500 by following these simple steps. First, open the hood and begin by removing the plastic cover located under the front wipers; then disconnect the electrical connector of the wiper motor, and proceed to unscrew the mounting screws of the entire mechanism, as shown in the video. At this point, replace the motor with the new one, ensuring it is the correct type and an original replacement, following the video to the end!

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on the Dodge RAM 2500
How to Replace the Fuel Pump on the Dodge RAM 2500
RAM 2500 (2002-2009 / DM, DC, D1, DH, MK 3, DR) Today's procedure will show you how to remove and replace the fuel pump on the Dodge RAM 2500, following the instructions below. First, lift the vehi…
How to Replace the Air Filter on a Dodge Ram 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) To replace the air filter on a Dodge Ram 2500, open the hood and locate the box containing the filter, positioned on the left side of the engine comp…
How to Replace Brake Pads on the Dodge RAM 2500
How to Replace Brake Pads on the Dodge RAM 2500
RAM 2500 (2009-2019 / MK 4, D2, DS, DJ) This guide shows the procedure for removing and replacing the front and rear brake pads on the Dodge RAM 2500. First, lift the vehicle and start by r…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos