Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Renault Trafic -

Renault Trafic (2014-2027 / mk 3)

Renault Trafic (2014-2026 / MK 3)
How to remove the stop light from Renault Trafic Master and Kangoo
We can see in this video how to remove the third brake light from the back of a Renault Trafic (but the same procedure can also be used for the Renault Master …Read all…
Posted on 11 June 2024 by ScegliAuto
Airbag (3) Alternator (5) Shocks (3) Air conditioning (1) Car stereo (7) Battery (15) Control arm (1) Grille (2) Transmission (1) Body (1) Key (9) Timing belt (2) A/C controls (1) Onboard computer (5) Checks and maintenance (28) Dashboard (2) Side marker light (2) Headlight (8) Tail light (5) Fog lights (1) Diesel particulate filter (1) Air filter (6) Cabin air filter (8) Diesel fuel filter (9) Oil filter (1) Parking brake (1) Grille (1) A/C system (1) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (3) Engine (1) Starter motor (9) Transmission fluid (1) Engine oil (5) Clock (12) Door trim panel (1) Front bumper (5) Rear bumper (1) Brake pads (2) Shift knob (2) Pump (1) Car door (4) Push button (1) Instrument cluster (6) Radiator (1) Heater core (1) Wheel (3) Fuse box (26) Seat (8) Door lock (1) Brake system (1) Side mirror (3) AdBlue warning light (18) Warning light – error code (26) (9) Tire pressure warning light (1) Service warning light (115) Windshield wipers (2) Tie rods (1) Turbocharger (3) EGR valve (5) Blower motor (2) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos