Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : Door trim panel

Renault Trafic - Door trim panel

Door Trim Panel Renault Trafic (2014-2027 / mk 3)

Renault Trafic (2014-2026 / MK 3)
How to disassemble the door panel of the Renault Trafic
Today we will explain how to remove the front door panel of the Renault Trafic. To carry out this simple operation, we need to open the door in question and …Read all…
Posted on 28 June 2025 by ScegliAuto
Airbag (3) Alternator (5) Shocks (3) Air conditioning (1) Car stereo (7) Battery (15) Control arm (1) Grille (2) Transmission (1) Body (1) Key (9) Timing belt (2) A/C controls (1) Onboard computer (5) Checks and maintenance (28) Dashboard (2) Side marker light (2) Headlight (8) Tail light (5) Fog lights (1) Diesel particulate filter (1) Air filter (6) Cabin air filter (8) Diesel fuel filter (9) Oil filter (1) Parking brake (1) Grille (1) A/C system (1) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (3) Engine (1) Starter motor (9) Transmission fluid (1) Engine oil (5) Clock (12) Door trim panel (1) Front bumper (5) Rear bumper (1) Brake pads (2) Shift knob (2) Pump (1) Car door (4) Push button (1) Instrument cluster (6) Radiator (1) Heater core (1) Wheel (3) Fuse box (26) Seat (8) Door lock (1) Brake system (1) Side mirror (3) AdBlue warning light (18) Warning light – error code (26) (9) Tire pressure warning light (1) Service warning light (115) Windshield wipers (2) Tie rods (1) Turbocharger (3) EGR valve (5) Blower motor (2) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos