Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : Air conditioning

Renault Trafic - Air conditioning

Air Conditioning Renault Trafic (2001-2014 / mk 2)

Renault Trafic (2001-2014 / MK 2)
How do you remove the heating control of the Renault Trafic 2?
The work we are about to perform in the Renault Trafic 2, the vehicle shown in the video, takes place entirely in the central area of the dashboard, which is …Read all…
Posted on 3 July 2025 by ScegliAuto
Airbag (3) Alternator (5) Shocks (3) Air conditioning (1) Car stereo (7) Battery (16) Control arm (1) Grille (2) Transmission (1) Body (1) Key (9) Timing belt (3) A/C controls (1) Onboard computer (5) Checks and maintenance (30) Dashboard (2) Side marker light (2) Headlight (8) Tail light (5) Fog lights (1) Diesel particulate filter (1) Air filter (6) Cabin air filter (8) Diesel fuel filter (9) Oil filter (1) Parking brake (1) Grille (1) A/C system (1) Accessory kit (1) Light bulb (3) Headlight bulb (11) Tail light bulb (1) Interior dome light bulb (2) Instrument panel light (1) License plate light (1) (1) Handle (3) Engine (1) Starter motor (9) Transmission fluid (1) Engine oil (6) Clock (12) Door trim panel (1) Front bumper (5) Rear bumper (1) Brake pads (2) Shift knob (2) Pump (1) Car door (4) Push button (1) Instrument cluster (6) Radiator (1) Heater core (1) Wheel (3) Fuse box (26) Seat (8) Door lock (1) Brake system (1) Side mirror (3) AdBlue warning light (19) Warning light – error code (26) Tire pressure warning light (10) Service warning light (117) Windshield wipers (2) Tie rods (1) Turbocharger (3) EGR valve (5) Blower motor (3) Steering wheel (2)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos