Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Renault Trafic

Model: Renault Trafic MK 3 - Years 2014-2026
Part: Door trim panel

Today we will explain how to remove the front door panel of the Renault Trafic. To carry out this simple operation, we need to open the door in question and use a Torx key to unscrew the lower and upper screws of the panel. We remove the central door handle to access the internal screws. We then unscrew the central screws and detach the panel from the door, being careful not to damage the plastic clips. Disconnect the connector of the window opening switch and the handle cable for the door opening. These same steps can also be done on Opel and Nissan vehicles.

Posted on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Door Lock in a Renault Trafic
How to Replace the Door Lock in a Renault Trafic
Renault Trafic (2014-2026 / MK 3) To replace the door lock in a Renault Trafic, first loosen the screws that secure the door panel so that you can completely remove it. After removing…
How to Remove Roof Lining on Renault Trafic
How to Remove Roof Lining on Renault Trafic
Renault Trafic (2001-2014 / MK 2) Do you want to remove the roof lining panel of a Renault Trafic? Let’s see how to remove the covering panel. Remove the side handles of the lining wi…
Where is the OBD Port on the Renault Trafic?
Where is the OBD Port on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) In this guide, we will help you locate the OBD port located inside your third-generation Renault Trafic in just a few seconds. It is a simple yet imp…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos