Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : Remove the starter motor on Renault Trafic

Renault Trafic - Video tutorial

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Starter motor
Operation: Remove the starter motor on Renault Trafic

How to remove the starter motor on Renault Trafic? Let's see how the damaged piece is disassembled. We disconnect the terminals of the starter motor power supply with a pliers or screwdriver depending on the pressure of the tabs. We remove the front bumper and all the front piping to get to the starter motor. We unscrew the locking pins of the starter motor with a socket wrench and remove it from the engine compartment. We replace the ignition motor with the connection of the power supply cables and with the attached tightening screws. We mount the front bumper and cover parts.


Posted on 30 January 2024 by ScegliAuto



How to replace the starter motor of the Renault Trafic 2.5 DCI
Renault Trafic (2001-2014 / MK 2) Let's see together the steps on how to disassemble and replace the starter motor of the Renault Trafic 2.5 DCI, following the instructions below. Fir
Starter motor replacement on Renault Trafic
Renault Trafic (2001-2014 / MK 2) Is the starter motor broken? We remove the starter motor from inside the engine compartment. We open and lift the engine compartment, disconnect the
How to replace the starter motor in the Renault Trafic van?
Renault Trafic (2014-2024 / MK 3) In this tutorial, we can see how to replace the starter motor in the Renault Trafic van, a simple operation if you have good manual skills. First of

Other guides that may interest you

    Frequently Asked Questions

    • Trafic 2001-2014 - Where is the starter motor of the 2014 Renault Trafic located? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos