Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor of the Renault Trafic

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Starter motor

Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Renault Trafic. First, we open the car's engine hood and start locating the starter motor, located at the bottom right; we remove the various pipes located above it. The starter motor is located next to the catalytic converter; to remove it, it will be necessary to access it from under the car, unscrewing the top and bottom screws and disconnecting the electrical wiring, as shown in the video. At this point, we replace and install the new starter motor.

Posted on 18 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Starter Motor on Renault Trafic
Replacing the Starter Motor on Renault Trafic
Renault Trafic (2001-2014 / MK 2) Is the starter motor broken? To remove the starter motor from the engine bay, open and lift the bonnet. Disconnect the power terminals of the starter…
Removing the Starter Motor from a Renault Trafic
Removing the Starter Motor from a Renault Trafic
Renault Trafic (2001-2014 / MK 2) How to remove the starter motor from a Renault Trafic? Here’s how to remove the damaged part. Disconnect the power terminals of the starter motor usi…
How do you replace the starter motor of the Renault Trafic?
How do you replace the starter motor of the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To replace the starter motor of the Renault Trafic, you will need to loosen the screws that hold it in place in its housing: the housing will be loca…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos