Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : How to clean the intake manifold of the Renault Trafic

Renault Trafic - Video tutorial

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Engine
Operation: How to clean the intake manifold of the Renault Trafic

It is evident that over time the intake ducts tend to become clogged due to the leakage of oil vapors and unburned fuel; clogging and consequent encrustations reduce the passage sections, hindering the correct passage of air to the detriment of performance and consumption; the result is the malfunctioning of the EGR valve which can also jam; obviously, in case of excessive clogging and encrustations, the best solution is to disassemble and clean everything; however, it is also possible to adopt the solution of periodic cleaning of the ducts, with special sprays: you will have to detach the intake manifold sleeve, start the engine, accelerate to keep it at about 1500 rpm and spray the product intermittently inside the conducted.


Posted on 14 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Trafic 2001-2014 - Why does the Renault Trafic engine not accelerate? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos