|
Do it yourself
| |||
| ||||
How to Replace the EGR Valve on a Renault Trafic
Model: Renault Trafic
MK 2
- Years 2001-2014
The EGR valve is located at the top of the engine, connected via a metal pipe to the exhaust manifold and has an electrical connector. To replace it on a Renault Trafic, turn off the engine and wait for it to cool down. Disconnect the negative terminal of the battery and remove the access elements. Remove the engine cover and the air box, along with the air duct using an 8 mm socket and a star screwdriver to unscrew the screws. Next, disconnect the electrical connector and unscrew the securing bolt of the EGR valve using a 10 mm socket with an extension. Remove the valve and gaskets, clean the mating surface and install the new gasket; insert the new valve and secure it with screws using the 10 mm socket with an extension. Tighten the bolts and reconnect the connector, reconnect the negative terminal of the battery and refit the air box and air duct. Refit the engine cover and close the front bonnet. Turn on the ignition to check that no engine warning lights are illuminated.
Posted on 9 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Trafic
(2001-2014 /
MK 2)
Before you can start, open the front bonnet of your Renault Trafic and remove the upper engine cover. Begin by disconnecting the connector attached t…
Renault Trafic
(2001-2014 /
MK 2)
In order to replace the EGR valve of the Renault Trafic, you need to open the hood to access the components located inside the engine compartment: he…
Renault Trafic
(2001-2014 /
MK 2)
In this tutorial we can see how to disassemble the EGR valve in the Renault Trafic van, a very simple and quick operation, to be carried out for exam…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.107
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |