Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : How to remove the EGR valve of a Renault Trafic

Renault Trafic - Video tutorial

Model: Renault Trafic MK 2 - Years 2001-2014
Part: EGR valve
Operation: How to remove the EGR valve of a Renault Trafic

Before we can start, we will have to go to open the front hood of our Renault Trafic, and then remove the upper engine cover. Let's start by disconnecting the connector connected to the EGR valve, simply by releasing the relative fixing clip. After that, we will have to unscrew and remove the bolts that secure the EGR valve to its seat. By doing so, we will have freed the EGR valve itself. We then proceed by disconnecting the relative sleeves. When we have completed this step, we will be able to remove the EGR valve, and we will have completed the disassembly.


Posted on 3 February 2024 by ScegliAuto



How do you replace the EGR valve of the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) In order to replace the EGR valve of the Renault Trafic, you need to open the hood to access the components located inside the engine compartment: he
Where is the MAP sensor located on a Renault Trafic
Renault Trafic (2001-2014 / MK 2) The MAP sensor (Manifold Absolute Pressure = absolute pressure sensor) is used for the recovery gases of the exhaust gases that re-enter the intake d
How to clean the intake manifold of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) It is evident that over time the intake ducts tend to become clogged due to the leakage of oil vapors and unburned fuel; clogging and consequent encr

Other guides that may interest you

    Frequently Asked Questions

    • Trafic 2014-2027 - Where is the EGR valve located on the Renault Trafic? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos