Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the EGR valve in the Renault Trafic van?

Model: Renault Trafic MK 2 - Years 2001-2014
Part: EGR valve

In this tutorial we can see how to disassemble the EGR valve in the Renault Trafic van, a very simple and quick operation, to be carried out for example to clean it or replace it directly. First of all, make sure that the engine is cold enough, then open the hood and remove the entire air filter box. Next, locate the valve in question, disconnect the sensor connector and unscrew the three fixing bolts with a 10mm socket wrench. At this point, we can remove the valve from the housing and install the replacement if necessary following the reverse procedure.

Posted on 19 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the EGR Valve from a Renault Trafic
How to Remove the EGR Valve from a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you can start, open the front bonnet of your Renault Trafic and remove the upper engine cover. Begin by disconnecting the connector attached t…
How do you replace the EGR valve of the Renault Trafic?
How do you replace the EGR valve of the Renault Trafic?
Renault Trafic (2001-2014 / MK 2) In order to replace the EGR valve of the Renault Trafic, you need to open the hood to access the components located inside the engine compartment: he…
How do you replace the EGR valve on the Renault Trafic?
How do you replace the EGR valve on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) It will be possible to replace the EGR valve of the Renault Trafic by opening the hood, allowing access to the components inside the engine compartme…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos