Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the EGR valve on the Renault Trafic?

Model: Renault Trafic MK 3 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: EGR valve

See other generations:
Video tutorial

It will be possible to replace the EGR valve of the Renault Trafic by opening the hood, allowing access to the components inside the engine compartment: here, the valve in question can be located at the rear relative to the engine, immediately under the exhaust manifold.

Once the valve's mounting screws and the connectors related to its sensors have been disconnected, it will be possible to remove it from its seat.

The new one can then be inserted to verify that everything functions correctly.


Posted on 22 January 2026 by ScegliAuto


Related tutorials

How to Remove the EGR Valve from a Renault Trafic
How to Remove the EGR Valve from a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Before you can start, open the front bonnet of your Renault Trafic and remove the upper engine cover. Begin by disconnecting the connector attached t…
How to Replace the EGR Valve on a Renault Trafic?
How to Replace the EGR Valve on a Renault Trafic?
Renault Trafic (2001-2014 / MK 2) To replace the EGR valve on a Renault Trafic, open the bonnet to access the components inside the engine bay: here you will find the air filter box, …
How to remove the EGR valve on a Renault Trafic van?
How to remove the EGR valve on a Renault Trafic van?
Renault Trafic (2001-2014 / MK 2) In this tutorial, you will see how to remove the EGR valve on a Renault Trafic van, a very simple and quick operation, for example, to clean or repla…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos