Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the turbine of the Renault Trafic 2.0 dCi

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Turbocharger

Today's main steps will show us how to disassemble and replace the turbine or turbocharger of the Renault Trafic 2.0 dCi. First, lift the vehicle and remove the lower engine partition; to remove the turbine, it will be necessary to disassemble the exhaust manifold, unscrewing all the fixing nuts, as shown in the video. At this point, unscrew the turbine screws and disconnect the electrical connector to remove it, removing all the upper parts including the intake duct; replace the turbine with a new one if necessary, following the video tutorial to the end!

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the turbocharger of the Renault Trafic 1.9 dCi
Guide to replacing the turbocharger of the Renault Trafic 1.9 dCi
Renault Trafic (2001-2014 / MK 2) In this guide we will see the main instructions that will allow us to disassemble and replace the turbocharger of the Renault Trafic 1.9 dCi. First, …
Guide to replacing the battery of the Renault Trafic 1.6 dCi
Guide to replacing the battery of the Renault Trafic 1.6 dCi
Renault Trafic (2014-2026 / MK 3) Today we will discover the instructions that will allow us to disassemble and replace the battery of the Renault Trafic 1.6 dCi. First, we open the v…
How to Replace the Starter Motor in a Renault Trafic 2.5 DCI
Renault Trafic (2001-2014 / MK 2) Let’s go through the steps to remove and replace the starter motor in a Renault Trafic 2.5 DCI, following the instructions below. First, open the bon…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos