Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Trafic
    4. : Renault Trafic 2 DCI (2013) turbine disassembly guide

Renault Trafic - Video tutorial

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Turbine
Operation: Renault Trafic 2 DCI (2013) turbine disassembly guide

In this video, let's see the main steps to be able to disassemble and replace the turbine of the Renault Trafic second series engine, with DCI engine. First of all, we open the bonnet and start by disassembling the air filter sleeve, also removing the whole filter box; then let's remove the two sleeves of the turbocharger, unscrewing the screws of the clamps. At this point we unscrew the screws of the exhaust duct, in order to remove it from our turbine; finally unscrew the fastening screws of the turbocharger, removing it and replacing it with the new one.


Posted on 24 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Trafic 2001-2014 - How much does it cost to change the Renault Trafic turbine? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos