Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor in a Renault Trafic 2.5 DCI

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Starter motor

See other generations:
This video is currently unavailable

Let’s go through the steps to remove and replace the starter motor in a Renault Trafic 2.5 DCI, following the instructions below. First, open the bonnet of your car and start by removing the front headlights and the bumper; to do this, unscrew the fastening screws located at the top and sides, as shown in the video.

Next, remove all necessary pipes to access the starter motor, remove it, and replace it with the new one; then reassemble everything by applying the reverse procedure!


Updated on 13 July 2026 by ScegliAuto


Related tutorials

Removing the Starter Motor from a Renault Trafic
Removing the Starter Motor from a Renault Trafic
Renault Trafic (2001-2014 / MK 2) How to remove the starter motor from a Renault Trafic? Here’s how to remove the damaged part. Disconnect the power terminals of the starter motor usi…
Replacement of the starter motor of the Renault Trafic
Replacement of the starter motor of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Today we will discover the instructions that will allow us to disassemble and replace the starter motor of the Renault Trafic. First, we open the car…
Replacing the Starter Motor on Renault Trafic
Replacing the Starter Motor on Renault Trafic
Renault Trafic (2001-2014 / MK 2) Is the starter motor broken? To remove the starter motor from the engine bay, open and lift the bonnet. Disconnect the power terminals of the starter…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos