Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the wipers of the Renault Clio III

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Windshield wipers

In this video, we will see how to change the windshield wipers of the Renault Clio III: with the car turned off, lift the wiper arms; to remove the blade, lift the locking tab using a flat screwdriver, then slide the blade downwards and remove it. Take the new blade, which you can purchase at a physical store or online, but considering the low cost of the component, shipping costs can be significant in this case. Install the correct adapter for mounting on our car and proceed with reassembly: place the blade in position, sliding it into its support. Put the blade back on the windshield and proceed to change the rear one. Lift the arm and tilt the blade at a 45° angle, so that it can be removed by unhooking it. Take the new blade, fit it into its support, and then place it back on the windshield.

Posted on 28 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wiper Blades on a Renault Clio 3
How to Replace the Wiper Blades on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Wiper blades on a Renault Clio 3 should be replaced at least once a year because external agents like rain, hail, and humidity can damage them. Malfu…
How to Replace the Wiper Blades on the Renault Clio
How to Replace the Wiper Blades on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To replace the wiper blades on the Renault Clio, lift the arms to which the blades are attached. Once the blades are raised along with the arms, lift…
How to Replace the Windscreen Wiper Motor on a Renault Clio
How to Replace the Windscreen Wiper Motor on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows you how to remove and replace the windscreen wiper motor on a Renault Clio, following the instructions below. First, open the bonnet…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos