Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear knob of the Renault Clio 3

Model: Renault Clio Clio 3, Clio III, MK 3 - Years 2005-2013
Part: Shift knob

In this new guide of ours, we will discover together the steps you need to take if you need to replace the gear knob of your Renault Clio Mk3. First of all, enter the car and completely turn it off if it is still on. Immediately after, take a flathead screwdriver and use it to remove the protective cover of the gear lever, then grab the knob and pull it forcefully upwards until it is completely removed. Once the old gear knob is removed, install a new perfectly compatible knob and you're done.

Posted on 26 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the gear knob of a Renault Clio
How to remove the gear knob of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before starting, we will have to sit in the driver's seat of our Renault Clio. Let's start then by going to disengage and lift the lower section of t…
How to replace the gear knob of the Renault Clio
How to replace the gear knob of the Renault Clio
Renault Clio (2005-2013 / Clio 3, Clio III, MK 3) If the gear knob in your Renault Clio is excessively worn and you want to replace it with a new one, simply read the following guide carefully and fo…
How do you replace the gear knob of the Renault Clio?
How do you replace the gear knob of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) It will be possible to replace the gear knob of the Renault Clio by grabbing the old component so that it can be rotated counterclockwise: while perf…

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos