Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Renault Modus

Model: Renault Modus MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight bulb

Video tutorial

Replacing the right front headlamp bulb on a Renault Modus is a fairly simple task to carry out independently. Before starting the replacement, it is advisable to raise the vehicle if possible.

Begin the replacement by removing the front bumper. To do this, unscrew the bolts located on the inner side of the vehicle, followed by the upper and lower ones.

Once the bumper is removed, you can take off the nuts securing the headlamp and pull it out. Remove the old bulb and insert the new one. After the replacement, reassemble everything.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Renault Modus
How to Replace the Front Headlamp Bulb on a Renault Modus
Renault Modus (2004-2013 / MK 1) How do you replace the front headlamp bulb? Lift the bonnet and locate the headlamp. You can either remove the front headlamp or replace the bulbs fr…
Replacing the Front Headlamp Bulb on the Renault Modus
Replacing the Front Headlamp Bulb on the Renault Modus
Renault Modus (2004-2013 / MK 1) Today’s steps will show you how to remove and replace the front headlamp bulb on the Renault Modus, following the instructions below. First, open the…
Replace the Bulb and Headlamp of the Renault Modus
Replace the Bulb and Headlamp of the Renault Modus
Renault Modus (2004-2013 / MK 1) This guide outlines the procedure necessary for removing and replacing the headlamp and bulb of the front headlamp of the Renault Modus. First, open …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos