Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Renault Modus

Model: Renault Modus MK 1 - Years 2004-2013
Part: Headlight bulb

Today's steps will show us how to disassemble and replace the headlight bulb of the Renault Modus, following the instructions below. First, we open the hood of the car and start by removing the plastic protective cap of the bulbs, located behind the headlight; then we disconnect the electrical connector to remove the low beam or high beam light, as shown in the video. At this point, we install the new headlight bulb, with the same attachment; we check its operation and finally reassemble the plastic cap.

Posted on 21 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change a Headlight Bulb on a Renault Modus?
How to Change a Headlight Bulb on a Renault Modus?
Renault Modus (2004-2013 / MK 1) This video shows how to replace a headlight bulb on a Renault Modus. Open the bonnet and locate the back of the affected headlight. Remove the rubber…
How to replace the front headlight bulb of the Renault Modus
How to replace the front headlight bulb of the Renault Modus
Renault Modus (2004-2013 / MK 1) Replacing the headlight bulb of the right front headlight of the Renault Modus is a fairly simple operation to perform independently. Before carrying…
Replace the Bulb and Headlamp of the Renault Modus
Replace the Bulb and Headlamp of the Renault Modus
Renault Modus (2004-2013 / MK 1) This guide outlines the procedure necessary for removing and replacing the headlamp and bulb of the front headlamp of the Renault Modus. First, open …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos