|
Do it yourself
| |||
| ||||
How to disassemble the dashboard of the Renault Clio II to reach the bulbs of the air conditioning panel.
Model: Renault Clio
Clio 2, MK 2
- Years 1998-2005
To disassemble the dashboard of the Renault Clio II, we must start by removing the radio from its housing, and we can do this by using a screwdriver to pull out the unit, and then disconnecting the electrical connectors found behind it. By doing this, we expose two screws. By unscrewing them, we will be able to remove the plastic trims around the air conditioning controls. By then applying pressure to the two tabs located under the knobs, we can also release the block with the knobs themselves, which may come out with some difficulty. It is not necessary to disconnect the electrical connectors, but we can access the bulbs, which we will remove with the help of pliers, turning them counterclockwise.
Posted on 6 December 2024 by ScegliAuto
This video is currently unavailable
Related tutorials
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
How to change the bulbs or LEDs in the air conditioning controls on a Renault Modus? Watch this video for guidance. Remove the radio from the dashboa…
Renault Clio
(2012-2019 /
Clio IV, MK 4, Clio 4)
This guide outlines the main steps to remove and replace the air conditioning compressor on the Renault Clio. First, lift the vehicle and remove the …
Renault Clio
(2005-2013 /
MK 3, Clio 3, Clio III)
As shown in the video, there are two methods to dismantle the car radio on a Renault Clio 3: either use 4 screwdrivers or 4 screws inserted into the …
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.762
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |