|
Do it yourself
| |||
| ||||
How to replace the rear shock absorbers of a Renault Modus
Model: Renault Modus
MK 1
- Years:
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
In this demonstrative video, we see how to replace the rear shock absorbers of a Renault Modus. We can find the replacement on E-Bay with the code 254978542377 for the price of 73.00 euros, with free shipping. We see that access to the top of the strut is very easy thanks to the door that we can find inside the trunk; we will need a 16 mm socket wrench. We remove the wheel and then remove the protective cover of the bottom part of the shock absorber; we support the car with a hydraulic jack and then lubricate the sealing screw, which we will remove with an electric drill and an 18 mm socket. We remove the old shock absorber and replace it with the new one, initially tightening the bolts less. We put the wheel back in place and lower the car. We tighten the lower bolt with a torque wrench to 10.5 Nm; we close the protective cover and tighten the upper bolt to 2.1 Nm. We close the trunk lid and move on to the other wheel.
Posted on 4 February 2025 by ScegliAuto
Related tutorials
Renault Modus
(2004-2013 /
MK 1)
In today's video, we will see how the rear seats of a Renault Modus work; this tutorial also applies to the longer Grand Modus version. First, open t…
Renault Modus
(2004-2013 /
MK 1)
In this guide we will see the instructions that will allow us to program and calibrate the power window motor of the Renault Modus. First, we get int…
Renault Modus
(2004-2013 /
MK 1)
The spacious interior of the Renault Modus is one of its strong points, and the car allows for the complete removal of the rear seats if you need to …
Other guides you may be interested in |
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.017
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |