Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights on the Renault Fluence?

Model: Renault Fluence MK 1 - Years 2009-2019
Part: Tail light

In this tutorial, we can see how to replace the rear lights on the Renault Fluence, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the trunk door, locate the two bolts positioned along the inner edge of the headlight in question and unscrew them using a Torx T20 key. Then grab the headlight, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the connector, replace the faulty element and reassemble everything following the reverse procedure.

Posted on 15 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the 2011 Renault Fluence?
How to Reset the Service Light on the 2011 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) To reset the service light on the 2011 Renault Fluence, use the arrow buttons located at the end of the lever on the right side of the steering wheel…
Where is the OBD port located on the 2015 Renault Fluence?
Where is the OBD port located on the 2015 Renault Fluence?
Renault Fluence (2009-2019 / MK 1) If you have not been able to locate the OBD port inside your 2015 Renault Fluence, don't worry because in the following guide we will explain where i…
How to reset the service light on a Renault Fluence?
How to reset the service light on a Renault Fluence?
Renault Fluence (2009-2019 / MK 1) In this tutorial, you will learn how to reset the service light on a Renault Fluence, a very simple and quick operation to perform only after complet…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos