Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the OBD Port of the 2015 Renault Fluence

Model: Renault Fluence MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Dashboard

Video tutorial

If you have not been able to locate the OBD port inside your 2015 Renault Fluence, do not worry because this guide will explain where it is located and how you can gain access to it. First, go inside the cabin, then shift your attention to the central part of the dashboard, specifically below the control panel.

At this point, locate the plastic cover and fully remove it, then find the OBD port you were looking for and you are done.

To use it, you need to have a diagnostic tool compatible with your Renault Fluence.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Where to find the fuse diagram for the Renault Fluence?
Where to find the fuse diagram for the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) Discover in detail, thanks to the tutorial video provided, the placement of the fuses inside the fuse boxes installed in the Renault Fluence. The doc…
How to Reset the Service Light on a Renault Fluence
How to Reset the Service Light on a Renault Fluence
Renault Fluence (2009-2019 / MK 1) To clear the Service light from the instrument panel of the Renault Fluence, turn on the display: this will allow you to navigate the menu shown on t…
Where are the Fuses Located in the Renault Fluence?
Where are the Fuses Located in the Renault Fluence?
Renault Fluence (2009-2019 / MK 1) The fuses in the Renault Fluence are located inside the dedicated fuse boxes installed on the vehicle: in this type of vehicle, you will find two box…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos