Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front door panel of the Renault Clio III

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Door trim panel

In this video, we see how to remove the door panel of a Renault Clio III: inside the compartment that contains the car's interior handle, we find a screw for fastening; under the speaker we will find two more screws to remove, and in the lower part of the plastic door panel, we will find three more screws for fastening, distributed along the entire length of the door. Three more screws can be found inside the handle socket. Once all these screws are removed, the panel is only held in place by clips, so all you need to do is push it from the bottom and then disconnect the power window connector, and the job will be done.

Posted on 23 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Speaker on the Renault Clio
Replacing the Front Speaker on the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today's main instructions will show you how to remove and replace the front door speaker of the Renault Clio. First, open the front door and begin to…
Replacing the Door Lock and Handle on a Renault Clio 3
Replacing the Door Lock and Handle on a Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will discover how to remove and replace the external door handle along with the driver’s side lock on a Renault Clio third series. …
Removing the Door Panel on Renault Clio 3
Removing the Door Panel on Renault Clio 3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In today’s video tutorial, you will learn how to remove the door panel of a third-generation Renault Clio. First, open the door and remove the grab h…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos