Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Replacement of the front speaker of the Renault Clio.

Renault Clio - Video tutorial

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Loudspeaker
Operation: Replacement of the front speaker of the Renault Clio.

Today's main instructions will show us how to disassemble and replace the front door speaker of the Renault Clio. First, we open the front door and begin to dismantle and remove the door panel by unscrewing all the fixing screws. Then, we pry on the sides to detach and remove it, as shown in the video. At this point, we unscrew the speaker screws to remove it, disconnecting its electrical connector. We can then repair it or replace it directly, finally reassembling the door panel and checking the functioning of the speaker!


Posted on 2 February 2024 by ScegliAuto



Remove the rear speaker on Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How to change the rear door speaker? Let's see the disassembly of the speaker on Clio. Let's remove the plastic cover to access the speaker, let's se
With replacing the speakers of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will see the instructions that will allow us to disassemble and replace the speakers of the front door of the Renault Clio. As a first step,
How to disassemble the speaker of a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see how to remove the speaker of a Renault Clio after removing the door panel. Before starting the disassembly work, let's disconnect the batte

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos