Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Remove the rear speaker on Clio

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Loudspeaker
Operation: Remove the rear speaker on Clio

How to change the rear door speaker? Let's see the disassembly of the speaker on Clio. Let's remove the plastic cover to access the speaker, let's see how to do it. We remove the plastic grille that covers the speaker: we rotate the grille to the left until it is unlocked. With a screwdriver we go to unscrew the tightening screws placed around the speaker and disconnect the power supply terminals placed behind it after having removed it. We connect the power supply terminals to the new speaker, fix the speaker and screw the tightening screws. Finally we cover the speaker with the cover grid.


Posted on 26 December 2023 by ScegliAuto



Replacement of the front speaker of the Renault Clio.
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Today's main instructions will show us how to disassemble and replace the front door speaker of the Renault Clio. First, we open the front door and b
How to disassemble the speaker of a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see how to remove the speaker of a Renault Clio after removing the door panel. Before starting the disassembly work, let's disconnect the batte
How to replace or install speakers on Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this short and simple guide we will see the steps that will allow us to disassemble and replace the speakers, both front and rear, of the Renault

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos