Do it yourself
Frequently asked questions about cars and motorcycles

How to remove the rear door panel of the Renault Scenic II

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Door trim panel

In this video, we can see how to disassemble the rear door panel of a Renault Grand Scenic II; but the procedure is the same for the regular version as well. Inside the compartment where the electric window switch is located, there is a cap hiding a small screw to remove; the same goes for behind the handle. In the back of the panel, there is another screw to remove under the speaker. Once these screws are removed, we can start applying some force on the outer side of the panel, in order to remove the three clips on the middle side of the panel, and the two that hold it in place at the top. Let's not forget that at the height of the window lifter, corresponding to the electric switch, we have a second locking screw from the inside. While pulling the panel towards us, we just need to be careful of the two clips at the bottom sides.

Posted on 26 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Scenic (2003-2009 / MK 2, Scenic 2) Let's see the information regarding the disassembly of the rear door panel of the Renault Scenic, in simple steps. First, open the rear door of the c…
Renault Scenic (1993-2003 / RX4, MK 1, Scenic 1) In this tutorial, we can see how to disassemble the rear door panel on the Renault Scenic, a very simple and quick operation. First, we open the door…
Renault Scenic (2003-2009 / MK 2, Scenic 2) In simple and short steps, we will see how to disassemble and replace the front door panel of the Renault Scenic. First of all, open the front door o…

Other guides you may be interested in

Removing the Door Panel on Ypsilon

Remove the door panel of the Lancia Ypsilon to access the speaker? Follow this guide to see how to do it. Unscrew all the securing screws located inside the cover panel. Disconnect the securing clips. Finally, pull the panel away with your hands and detach it from the door (disconnect the power wiring and the opening cable). Remove the speaker from inside the door. Refit the panel onto the car door and screw in the screws. Don't forget to reconnect the power terminals behind the panel before refitting it. Test the operation of the newly installed speaker.

Watch the video!


by ScegliAuto

More videos