Do it yourself
Frequently asked questions about cars and motorcycles

How to repair the window lifter of a Renault Clio MK2 or a 2002 Citroen C3

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Checks and maintenance

In this video we see how to repair the window regulator of a Renault Clio MK2; the system also works for the Citroen C3 from the same period. To remove the panel, we must start with the small triangle that covers the contacts of the electric mirror; then we remove the cover of the door, which is all snap-on, then there are four screws under the panel, the screw of the internal lock, and a screw under a plug inside the compartment where the electric window control is located. From here we will also remove the electrical contacts. Remember that on this model there are no clips, but adhesive, so we will have to pull hard. We remove the three nuts that hold the motor (which is working, but the window does not go up or down), and then we also remove the electrical plug. Now we remove the bolts that secure the guide at the bottom. In the meantime, we have secured the window with tape so that it does not fall. By removing the window regulator, we saw that at the bottom of the door we found a broken piece of plastic. In fact, examining the device, we found that the pin used to raise and lower the window had broken in two. It is a replacement that does not exist, we would have had to change the entire mechanism, so the youtuber decided to replace the pin with a rubber gasket from glass bottles, fixing it with a drop of silicone.

Posted on 8 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will cover the main instructions to dismantle and replace the window regulator motor on a Renault Clio. First, open the front door …
Renault Clio (1998-2005 / Clio 2, MK 2) In this guide, you will see the instructions that will allow you to remove and replace the motor and window regulator mechanism on a Renault Clio. Fi…
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video, we see how to disassemble the interior part of the door of a Renault Clio III and repair the sliding of the front window. The YouTuber…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos