Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front optical group of the Renault Megane III

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight

See other generations:
Video tutorial

In this video we can see how to disassemble the front light cluster of the Renault Megane III: we find 10 mm bolts clearly visible on the front part of the engine compartment of the car, which hold brackets, one on the front part, one in the middle part and one more inside the hood.

However, when we have removed these fixings, the headlight is not yet free.

There is a latch on the bottom, so we should not pull forcefully, but release it gently. Once we have removed the light cluster, we can remove the rear caps and check the functioning of the bulbs and eventually replace them.


Posted on 21 July 2025 by ScegliAuto


Related tutorials

How do you replace the rear light bulb of a Renault Megane?
How do you replace the rear light bulb of a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) The replacement of the bulb located inside the rear light assembly on the Renault Megane can be carried out by opening the hatch, allowing access to …
How do you replace the headlight bulb of the Renault Megane?
How do you replace the headlight bulb of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In order to replace the headlight bulb on the Renault Megane, you will need to open the hood to locate the screws that secure the corresponding optic…
How to Remove the Rear Light of the Renault Megane
How to Remove the Rear Light of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the rear light of the Renault Megane, open the tailgate to access the components inside the boot: here you will find the internal cover of …

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos