Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear light bulb of a Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light bulb

See other generations:
Video tutorial

The replacement of the bulb located inside the rear light assembly on the Renault Megane can be carried out by opening the hatch, allowing access to the inside of the trunk. Once the covering corresponding to the light has been removed, it will be possible to unscrew the pin underneath that secures the light assembly in its place.

At this point, you can disconnect the connector below so that the bulb inside can be removed. The new bulb can now be inserted to reassemble the light.


Posted on 8 January 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Light Bulb on the Renault Megane 3
How to Replace the Rear Light Bulb on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) To correctly and safely replace the rear light bulb on your Renault Megane Mk3, follow these simple steps. First, turn off the car and go to the rear…
How to Replace the Rear Headlamp Bulb on a Renault Megane 3
How to Replace the Rear Headlamp Bulb on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) To replace one of the bulbs located inside the rear headlamp of your Renault Megane Mk3, follow the procedure outlined in this guide. First, lift the…
How to Replace the Rear Headlamp Bulb of the Renault Megane 2
Renault Megane (2002-2010 / Megane 2) This guide shows how to correctly replace the rear headlamp bulb of your Renault Megane Mk2. First, park the vehicle safely, then switch it off compl…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos