Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light

To remove the rear light of the Renault Megane, open the tailgate to access the components inside the boot: here you will find the internal cover of the light assembly, which must be detached to access the underlying fixing bolt. By loosening this bolt, you can slide the light out of its housing, disconnecting the connector at the back: at this point, you can connect the new light assembly, securing it in place with the previously removed bolt.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light from a Renault Megane
How to Remove the Rear Light from a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To remove the rear light from a Renault Megane, open the tailgate to access the screw located next to the light. Once this screw is loosened, detach …
How do you remove the rear headlight of the Renault Megane?
How do you remove the rear headlight of the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In order to remove the rear light of the Renault Megane, you need to open the rear hatch so that you can locate the side panel covering the light. On…
How to Remove the Rear Light on Renault Megane
How to Remove the Rear Light on Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) How do you remove the rear light from the Megane? Start by lifting the boot. Locate the trim on the side of the compartment. Remove the fabric cover …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos