Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Light of the Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Tail light

This guide shows how to remove and replace the rear light of the Renault Megane in simple and quick steps. First, open the boot lid and start by removing the plastic caps next to the rear light; then unscrew the screws located inside, as illustrated in the video. At this point, gently remove the light from the bodywork, disconnecting the electrical connectors of the bulbs at the back; if necessary, replace the bulbs and reassemble the rear light, applying the reverse procedure of disassembly!

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Light Bulbs on a Renault Megane
How to Change the Rear Light Bulbs on a Renault Megane
Renault Megane (2002-2010 / Megane 2) How to change the rear light bulbs on a Renault Megane? Open the boot lid, unscrew the securing screws located at the side of the rear light using a …
Disassembly of the rear light and bulbs of the Renault Megane
Disassembly of the rear light and bulbs of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In a few simple steps, we will see the process of how to disassemble and replace the rear light and its bulbs of the Renault Megane. First, open the …
How to Remove the Right Rear Light of a Renault Megane
How to Remove the Right Rear Light of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Are the lights on the rear light of your Renault Megane not working anymore? Let's see in this video how to remove the right rear light. Open the boo…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos