Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Tail light

See other generations:
Video tutorial

How do you remove the rear light from the Megane? Start by lifting the boot. Locate the trim on the side of the compartment.

Remove the fabric cover on the side trim of the boot, unscrew the plastic nuts behind the rear light, disconnect the power connectors attached to the light, and pull it out of its housing. Replace any damaged bulbs with new ones (same voltage) at hand.

Refit the light with the respective securing nuts. Replace the rear light if it is irreparably damaged.


Updated on 14 April 2026 by ScegliAuto


Related tutorials

How to Remove the Right Rear Light of a Renault Megane
How to Remove the Right Rear Light of a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Are the lights on the rear light of your Renault Megane not working anymore? Let's see in this video how to remove the right rear light. Open the boo…
How to Change the Rear Light of the Renault Megane
How to Change the Rear Light of the Renault Megane
Renault Megane (2002-2010 / Megane 2) This guide shows how to remove and replace the rear light of the Renault Megane in simple and quick steps. First, open the boot lid and start by remo…
How to Remove the Right Rear Light on a Renault Megane
How to Remove the Right Rear Light on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) In this video, you will learn how to remove the right rear light on a Renault Megane. First, lift the boot lid and open the inspection hatch located …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos