Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the rear door panel of the Renault Captur.

Model: Renault Captur MK 1 - Years 2013-2019
Part: Door trim panel

These short and simple steps will show us how to disassemble the rear door panel and window regulator mechanism of the Renault Captur. First, we open the rear door of the vehicle and start unscrewing all the fixing screws we find on the panel, levering on the sides to detach and remove it; we disconnect the handle cable and the electric connector of the window switch panel, as shown in the video. Next, the disassembly and replacement of the window motor are shown, reassembling the door trim last!

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Door Panel from Renault Captur
Removing the Rear Door Panel from Renault Captur
Renault Captur (2013-2019 / MK 1) In this video tutorial, follow the steps to remove the rear door panel from a Renault Captur. First, open the door and remove the caps that hide the …
Disassembly of the rear bumper of the Renault Captur
Disassembly of the rear bumper of the Renault Captur
Renault Captur (2019-2026 / MK 2) To remove the bumper of the Renault Captur, start by opening the rear hatch. Using a Torx T20 screwdriver, unscrew the two screws on the inner side o…
Instructions for Removing the Door Panel from Renault Captur
Instructions for Removing the Door Panel from Renault Captur
Renault Captur (2013-2019 / MK 1) Today, we will see the main instructions for removing the door panel from a Renault Captur. First, open the door and remove the four screws with a To…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos